Linn Forums

Current time: 2017-09-24, 18:22 Hello There, Guest! (LoginRegister)

Linn Forums / Linn Music Systems & Hi-fi Separates / Troubleshooting v / kdsm/1 rca outputs stopped working

Post Reply 
kdsm/1 rca outputs stopped working
2017-06-11, 16:02
Post: #1
kdsm/1 rca outputs stopped working
Did anyone else's kdsm unbalanced analog outputs stop the working after the last ds software update? Mine did. I use the unit for an exakt setup but used the analog output for years to a sub and a headphone amp... now it doesn't work. Setup is correct in konfig. The Unit's using the analog outputs are not defective, I tested them. Thoughts before I role back? Jeff

KDSM/1, KLP12, Exakt Dorik Stands, Exaktbox Sub, 212s v.1, 221, Audience AR6. Other Linn and Naim as well.
Find all posts by this user
Quote this message in a reply
2017-06-11, 16:28 (This post was last modified: 2017-06-11 16:35 by JPO2005.)
Post: #2
RE: kdsm/1 rca outputs stopped working
1. Try to Reboot the DSM on the Start Side from Konfig
2. Switch off the KDSM for 2min.
3. Can enable or disable the Output in Konfig?
4. Recover the KDSM on the "Advanced" Site (Settings to back up)

Witch Versions you have Davaar and Software Version.

Greetings Jörn (sorry for my awful english)
Hörland - Over 40 years LINN
Open Source Seite: http://www.jpo-aktuell.de/OpenSource.php

New LP12, Radikal, Urika, Kore, Ekos SE, Kristal / QNAP 569 Pro / RME UCX
Akurate Exakt DSM2 / Kinsky (Minim) - Sneaky
Akubarik with Amp Stands / Silvercable - Unik / K200
Visit this user's website Find all posts by this user
Quote this message in a reply
2017-06-11, 17:28
Post: #3
RE: kdsm/1 rca outputs stopped working
Thanks JPO. The reboot and turnoff didn't help. I'll try rolling back later. It's a davaar software issue for 4.56.177 unless I have to reconfigure differently due to the 7.1 surround release. Jeff

KDSM/1, KLP12, Exakt Dorik Stands, Exaktbox Sub, 212s v.1, 221, Audience AR6. Other Linn and Naim as well.
Find all posts by this user
Quote this message in a reply
2017-06-19, 12:13
Post: #4
RE: kdsm/1 rca outputs stopped working
(2017-06-11 17:28)Jeff R Wrote:  It's a davaar software issue for 4.56.177 unless I have to reconfigure differently due to the 7.1 surround release. Jeff

You will need to reconfigure slightly. A new option now exists in Konfig under the device tab: Dual Analogue/Exakt Stereo Output.

You will need to enable this option if you want exakt and analogue outputs simultaneously
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)